DC 12V Submersible Pump, 27W, 660L/H Flow Rate, 3-Meter Lift, BLDC | 27W low-power motor, under 40 dB operation, 1/2 inch threaded inlet and outlet, fits submersible or inline setups
Rated 0 out of 5
0 Reviews
Electrifier 0.96 Inch OLED Display 128x64 I2C Module Pack of 2 | Two identical OLED modules per pack | Build one, keep one spare | Self-emissive, no backlight needed
Rated 0 out of 5
0 Reviews
Electrifier 0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color | Self-emissive panel, no backlight | Deep blacks, high contrast | Runs on any I2C microcontroller board
Rated 0 out of 5
0 Reviews
Electrifier 1.3 Inch OLED Display Module 128x64 I2C Blue Monochrome | Self-lit pixels, deep blacks, no backlight | 3.3V regulator, 3.3V-5V input | 4 mounting holes | breadboard friendly
Rated 0 out of 5
0 Reviews
Electrifier 1.3 Inch OLED Display Module 128x64 I2C Blue Pack of 2 | Two matched panels for dual readouts or a ready spare | 3.3V-5V input, onboard regulator | 4 mounting holes each
Rated 0 out of 5
0 Reviews
Electrifier 100RPM Dual Shaft BO Motor with 65mm Wheel, 2WD Set of 2 | Drives 2WD chassis with caster support, 0.8 kg cm torque, 3V start, encoder-ready rear shaft, low current battery drive
Rated 0 out of 5
0 Reviews
Electrifier 100RPM Dual Shaft BO Motor with 65mm Wheel, DIY Robot Set of 4 | Powers line follower and obstacle avoidance builds, 0.8 kg cm torque, 3V start, plug-fit hubs, low current battery drive
Rated 0 out of 5
0 Reviews
Electrifier AMP100 Class D Bt 5.0 Amplifier Board 2x100W 4-8 Ohm 5-24V | Wireless Bluetooth, AUX in and 3.5mm out, USB U-disk playback | stepless volume with play and pause push control
Rated 0 out of 5
0 ReviewsElectrifier Dual Shaft BO Motor 300 RPM 3V-12V with Wheels, Set of 2 | 0.35 kg cm rated torque, push-fit tyres, encoder disc support, complete drive pair for 2WD line follower and smart car builds
Rated 0 out of 5
0 Reviews
Electrifier Dual Shaft BO Motor 300 RPM 3V-12V with Wheels, Set of 4 | 0.35 kg cm rated torque, push-fit tyres, encoder disc support, ideal for line follower, obstacle avoider and STEM builds
Rated 0 out of 5
0 Reviews
Electrifier HC-05 Bluetooth Module 2 Pack Wireless Transmitter Receiver | Pair two units as master and slave via AT commands, push button on each board, 3.3V logic pins, integrated trace antennas
Rated 0 out of 5
0 Reviews
Electrifier HC-05 Bluetooth Module UART Serial 2.4GHz for DIY Projects | Master and slave modes via AT commands, onboard push button, 3.3V logic level, default 9600 baud, 6-pin breakout header
Rated 0 out of 5
0 Reviews
Electrifier L293D Motor Driver Shield for ATmega328P Boards, 4 DC Motors | Stacks on R3-layout ATmega328P and ATmega2560 development boards, 0.6A per channel, 1.2A peak, screw terminal wiring
Rated 0 out of 5
0 Reviews
Electrifier Nano R3 ATmega328P Development Board CH340 Mini-USB 16MHz | Breadboard-Friendly | 14 Digital I/O, 6 PWM, 8 Analog Inputs | 32KB Flash | Male Headers Included | USB or 7-12V Powered
Rated 0 out of 5
0 Reviews
Electrifier XY-AP50H Bluetooth 5.0 Stereo Amplifier Board 50W+50W Class D | Four input modes — AUX, USB sound card, U-disk and wireless | DC 5-24V input | drives 4-8 Ohm speakers | rotary volume
Rated 0 out of 5
0 Reviews
Electrifier XY-P40W Bluetooth 5.0 Stereo Amplifier Board DC 8-24V | Up to 40W per channel peak | 4-8 ohm speaker support | onboard volume and play/pause | screw terminal wiring
Rated 0 out of 5
0 Reviews