Electrifier 125A Distribution Block 6 Output DIN Mount Brass Connectors | 1 Input , Hexagon socket clamp terminals secure each conductor | Accepts up to 35mm² input and 16mm² branch cables

Electrifier's UKK125 distribution block gives panel builders and installers a clean way to take one incoming supply and fan it out to several branch circuits without a tangle of splices. A single common conductor bar feeds every terminal, so a main feed in becomes six tidy outputs — with a second 16mm² input position for flexibility — ideal wherever a sub-main, a solar string, or a control circuit has to be split and landed in one compact device. Each conductor is secured by a recessed hexagon socket set screw, giving a high-contact, vibration-resistant joint that stays tight under load, and two Allen keys are supplied so the block is ready to wire straight out of the box. The input side accepts cable up to 35mm² alongside a 16mm² conductor, while the six outputs each take up to 16mm², matching the block's 125A rated current and 690V AC / 1000V DC rated insulation voltage. A hinged transparent cover shields the live terminals from accidental contact and dust, and flips open for quick access when you add or move a branch line. Installation is flexible: integrated flat mounting feet let you screw the block directly to an enclosure backplate, or you can snap it onto standard 35mm DIN rail inside a distribution board. That makes it equally at home in domestic and commercial distribution boards, solar PV combiner and inverter wiring, pump and motor control panels, and general sub-mains tap-offs where one supply has to serve several loads. It suits electricians, solar installers, panel fabricators, and maintenance teams who need single-point distribution rated for continuous duty. Every Electrifier UKK125 block is produced in an ISO-certified manufacturing facility and backed by a one-year Electrifier warranty with responsive Indian support, so you can specify it with confidence.