Electrifier 150W DC-DC Boost Converter Step-Up Module 10-32V to 12-35V | Multi-turn trimpot for precise output | Dual heatsinks & toroidal inductor | 4-pole screw terminals | 1-year warranty

The Electrifier 150W DC-DC Boost Converter solves a common problem in DC power: when your battery or supply sits below the voltage your load needs. It steps any input from 10V to 32V up to a clean, adjustable output between 12V and 35V, so a 12V battery can run a 19V laptop, a 24V industrial sensor, or a 32V LED string from a single compact module. Output voltage is set with an onboard multi-turn trimpot. Unlike a single-turn pot that drifts at the slightest touch, the multi-turn screw lets you dial in your target on the OUT+ and OUT− terminals and hold it precisely. A hand-wound toroidal inductor and twin aluminium heatsinks handle the current and heat that define a genuine 150W-class boost stage, rather than the small fixed-output booster boards rated for only a few watts. Manufacturer-stated figures include a wide −40°C to +85°C component rating, roughly 25mA no-load current, and a 200µs dynamic response. Wiring is via a four-pole screw terminal block marked IN+, IN−, OUT− and OUT+, with four corner holes for fixed mounting. The 150W rating is a peak figure; for sustained high-power use, add forced-air cooling and size your output current to the chosen voltage. This is a step-up converter, so the output must stay above the input, and there is no onboard reverse-polarity protection — observe input polarity and add a series diode or fuse for automotive or unattended setups. It suits DIY and prototype power supplies, automotive 12V-to-19V laptop charging, solar and off-grid rails, LED drivers, amateur radio, and audio supplies — anywhere the available voltage is lower than the rail you need. Every unit is assembled in an ISO-certified facility, bench-checked before dispatch, and backed by a one-year Electrifier warranty with India-based support: honest specifications and fair pricing.